Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
bfe medical masks
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
Address：No. 3888, Hutai Road, Baoshan District, Shanghai, China
Hand disinfection → remove goggles hand disinfection → ,take off protective clothing, (unzip the zipper, ,take off, the hat first, touch the inner surface of the ,protective clothing, from the back to roll down to the bottom of the foot, the hand should not touch the outside of the ,protective clothing, during the whole ,process,) → hand disinfection → Disinfect gloves and hands → Disinfect ...
How to ,Take Off, (Doff) PPE Gear. More than one doffing method may be acceptable. Training and practice using your healthcare facility’s procedure is critical. Below is one example of doffing. Remove gloves. Ensure glove removal does not cause additional contamination of hands.
16/4/2020, · Seven steps of hand-washing; wearing a cap; wearing a medical protective mask (taking the leak test); wearing medical protective clothing (after removing shoes); wearing latex gloves (inner layer); wearing isolation clothing; wearing latex gloves (outer layer); wearing rubber boots/shoes; wearing boot/shoe covers; wearing goggles/face shield; checking tightness.
How to take off protective clothing 1.Unzip 2.Pull the cap up and back to lift the head off the cap and support the sleeve. 3.Take off the edge roll from top to bottom. 4.Take off the clothes and put the contaminated face into the medical waste bag after taking off.
14/8/2020, · the process in the first buffer room: hand hygiene → put on a new surgical mask and medical cap → hand hygiene → enter the clean area after disinfecting the door handle. The process of putting on the PPE and getting ready to go into the isolation room would take about 30 min. The process of removing PPE after coming out of the isolation
After surgery, medical staff must use quick-drying hand disinfectant before and after removing protective clothing, after taking off googles and hat, after removing the inner gloves, and again after removing masks before donning new masks and immediately leaving the operating room.
Reusable medical devices shall be disinfected according to the disinfection procedures of SARS-CoV-2 related reusable medical devices; Disinfect and dispose of medical fabrics Medical fabrics shall be disinfected and disposed of according to the disinfection procedures for SARS-CoV-2 related infectious fabrics. Disinfect the surfaces of objects
1.Expand protective clothing. 2.Pull the zipper apart. 3.Put into the legs from the zipper opening in turn. 4.Wear upper coat. 5.Stick hands out of sleeves. 6.Wear hooded. 7.Pull the zipper from the front of the chest. 8.Tear off the off-type paper on the double - sided adhesive and press the seal from top to bottom. Ways to take off the isolation clothing
Protective clothing, should be worn in the following situations: ① When clinical ,medical, personnel come into contact with patients with infectious diseases of Class A or Class A infectious diseases. ②When exposed to patients with infectious diseases spread by air or droplets, they may be splashed by blood, body fluids, secretions and excreta.